Interesting Facts on Samurai Sword Manufacture

A samurai's sword is his most sacred and prized possession. Not only did the samurai rely on his sword to defend him, but spiritually the sword held greater significance as the samurai actually believed his soul inhabited the sword. Therefore it comes as no surprise that the same discipline and respect in which the samurai wielded his sword, went into the actual making of the sword itself.

Swords weren't simply 'cast' in a mould and then sharpened. A Japanese samurai sword was made by an intricate process of heating the steel, hammering it flat, then folding it, then hammering it flat again, and folding. This process of repeated hammering and folding would be done up to as much as 30 times, or until the maker was satisfied it had been done properly.

There are quite a few reasons for this labour-intense procedure. Firstly, any air pockets which might develop during the heating of the steel would be eliminated. Having an air pocket in a seemingly solid blade would be a weak point, and any weak point would be seen as neglect and any dedicated artisan would produce the highest quality blades as if his own life depended upon the very blade he was forging. Secondly, in the repeated folding and hammering, what might be described as 'layers' were produced. Take a book and roll it up it parallel with the spine, these internal layers would look something like this, almost like the rings of a cross section of a tree trunk. This added much strength to the blade.

Also the natural strengthening carbon elements within the steel, as well as the steels impurities would be spread throughout the whole of the sword, therefore strengthening it in its entirety. When the blade came to be cooled it wasn't simply quenched in water, another process had to be done first. When steel is been cooled, if it cools from a high temperature right down to cold in a short amount of time, the metal becomes very hard and brittle. Conversely, if steel is cooled slowly from a lower temperature right down to cold, the steel takes on more supple, even softer properties. Because a samurai sword was used primarily as a slicing weapon the blades were subjected to a lot of shock upon impact on the enemy, therefore the blade couldn't be made of the more brittle steel throughout else it would shatter like glass. But the sword had to retain its sharp edge, so it couldn't be made of softly forged steel throughout else it would simply blunt. So a balance was struck using a very clever procedure.

What the Japanese samurai sword makers discovered was by painting on a clay formula onto the blade before quenching, thin amounts onto the cutting edge and thicker amounts onto the back, the steel could be made to take on two completely separate properties, thereby giving the blade the hard cutting edge it required, and the more supple back. Because of the different speeds in which the two halves of the steel cooled this also formed the beginning of the curve from which the sword makers would work to create the famous curved blade.

Article by Nick Johnson, visit his website for more on samurai swords http://www.japanese-samurai-swords.net

Latest News


Atlantic Online

Heart of a Samurai
Atlantic Online - 4 hours ago
But in the past decade, the mixed martial arts have fought their way to a comeback. New safety regulations have won over big-time promoters and networks—not ...
David Samuels interviews Ultimate Fighting Champion BJ Penn Atlantic Online
Arianny Celeste, Octagon Girl Atlantic Online
Lorenzo Fertitta Atlantic Online
all 4 news articles

Karate training gives her confidence and focus
Indianapolis Star, United States - 16 hours ago
I started taking lessons at the Koryukan USA Martial Arts Training Center two to four times a week with Sensei Tom Everett. ...

Ultimate Martial Arts competes at USSSA meet
Newton Kansan, KS - 5 hours ago
Members of the Ultimate Martial Arts Academy of Newton competed at the USSSA Region VI Tae-kwon-do Championships Nov. 1 in Dodge City. ...

University graduate student makes sport of Mixed Martial Arts fighting
Bowling Green News, OH - 15 hours ago
In the '80s there was boxing, in the '90s wrestling was popular; and in this new century there is Mixed Martial Arts, or MMA. The new combat sport has grown ...

Southern New Jersey Martial Arts and Karate School Focuses On ...
WebWire (press release), GA - 7 hours ago
There are a great many benefits of martial arts and karate instruction for kids and youths. Getting this information out to parents and getting their ...

Ginch Gonch Fashion Hits the Big 'Rig' Time With Load'N & Dump'N ...
MarketWatch - 6 hours ago
"I'll knock out anyone who makes fun of me in my Ginch," warned Mixed Martial Arts welterweight fighter Ryan "The Real Deal" Ford; the mighty-muscled, ...

P1 Exclusive: Hojutsu-Ryu, the martial art of shooting
Police News, CA - Dec 1, 2008
By Jeffrey Hall At first glance, the concept of shooting as a “traditional” martial art seems ridiculous. After all, martial arts are steeped in centuries ...

New style of karate introduced in Whitbourne
The Charter, Canada - 6 hours ago
The founder of Uechi Ryu was Kanbun Uechi (1877-1948), an Okinawan who went to China to study martial arts when he was 20 years old. ...

Her family ties are martial-arts belts
Modesto Bee, CA - Nov 30, 2008
When she married her husband, Rick, almost 20 years ago, she had one child and he had three, and tutoring the children in martial arts became a way of ...

Atlantic Online

Profile December 2008 Atlantic
Atlantic Online - 4 hours ago
Stripped to the waist inside a tiny sweatbox gym inside an A-frame house on an industrial street near Big Bear Lake, California, a mixed-martial-arts ...

Resources